TEYING BUYER GUIDE · UPDATED OCTOBER 23, 2026

What a China Jewelry Entry Costs in Duties, Line by Line

No single rate covers a China jewelry shipment. Duty is a stack of measures that changes with the ten-digit line, and this is the October 2026 arithmetic.

US customs duty calculation for a jewelry import from China
Project-specific jewelry development, sampling, and packaging guidance from TEYING.
What changed: October 23, 2026 rewrite: new title, restructured sections and rewritten FAQ; all facts and figures unchanged.

Three duties, one heading, a number that keeps moving

A jewelry entry from China in October 2026 does not carry a tariff. It carries a stack. The MFN rate for the heading sits at the bottom, Section 301 duties sit on top of it, and the order of the layers matters less than which ten-digit line the goods land on.

Two benchmarks are worth carrying in your head before a broker call. Gold-plated brass under HTS 7117 lands around 28% to 31%. 925 silver under 7113.11.20 runs about 33.5%. Both figures stop before MPF, HMF, freight and brokerage, and both move the moment the line or the trade measures move.

Everything below is general guidance as of October 2026. It is not customs, tax or legal advice, and it will not survive contact with a broker who has your paperwork in front of them.

What each layer actually is

The MFN rate is the ordinary duty the United States applies to a heading for a normal trading partner. It is the oldest number in the calculation and the one most often ignored, because it looks small next to the Section 301 lines.

Section 301 adds two separate measures, and they are not interchangeable. The first is the China-specific List 4A duty under 9903.88.15, assessed at 7.5% on the goods value. The second is the forced-labor tariff under 9903.05.31 that took effect in July 2026, which puts China in its 12.5% tier. A quotation that folds both into one word, "the China tariff", hides which of the two might change next.

Heading 7117: gold-plated brass

Project decision comparison
ElementLine or basisRate, October 2026
MFN, Column 1 General7117.19.9011%
Section 301 China, List 4A9903.88.157.5%
Section 301 forced labor9903.05.31, China origin12.5%
Total before fees31%

The 11% is not universal inside 7117. Ten-digit lines in the heading run from about 8% to 11%, which is exactly why the practical answer for gold-plated brass is a range of roughly 28% to 31% rather than a clean number. A plated brass earring stays in 7117 even when the invoice says gold.

Heading 7113: 925 silver

Project decision comparison
ElementLine or basisRate, October 2026
MFN, Column 1 General7113.11.20 (silver, not over $18 per dozen)13.5%
Section 301 China, List 4A9903.88.157.5%
Section 301 forced labor9903.05.31, China origin12.5%
Total before fees33.5%

Same stacking pattern, different base. Within 7113.11 the MFN rate tracks the declared value per dozen and steps from roughly 5% up to 13.5%, so the combined figure slides with the value you put on the entry. A silver pendant with a gold color layer is 7113, not 7117.

Where each measure stands now

Tariff writing ages badly. Most guides still describe duties that were struck down mid-2026, so here is the status of each measure with the date that matters attached to it.

Project decision comparison
MeasureStatusKey date
De minimis, Chinese-origin goodsRemovedMay 2025
Statutory end of the de minimis exemptionSet in the One Big Beautiful Bill Act (Public Law 119-21)July 1, 2027
De minimis suspension, worldwideExtended under Executive Order 14324August 29, 2025
IEEPA tariffsStruck down; Supreme Court ruling in Learning Resources v. Trump holds IEEPA does not authorize tariffsFebruary 20, 2026
Replacement bridgeCBP stops collecting IEEPA duties; temporary flat 10% under Section 122 of the Trade Act of 1974 takes overFebruary 24, 2026
De minimis codificationCBP interim final rules place the suspension at 19 CFR 10.151 for non-postal shipments; mail followsJune 24, 2026, with postal treatment from July 24, 2026
Section 301 forced-labor tariffs10% to 12.5% on 60 economies; China in the 12.5% tier. The Section 122 bridge reaches its statutory limit the same dayJuly 24, 2026

One item is still open. Several states challenged the forced-labor tariff in court in August 2026, and CBP has kept collecting while the case runs. Until a broker tells you otherwise, treat the 12.5% as live and price it in.

Why a published rate is never your rate

Three reasons apply to this page as much as to any other.

1. Measures move faster than pages get updated. The IEEPA duties were collecting one month and gone the next, and a replacement arrived in July 2026. Anything written before that date describes a different regime.

2. The rate attaches to the ten-digit line, and the line follows the material. Two products under the same six-digit heading can carry different MFN rates, and an exclusion that covers one line may skip the next. Exclusion windows have been extended and allowed to lapse on their own schedule.

3. Origin, value and Incoterm change the answer. Origin is where the goods are made, not where they ship from. With de minimis gone, even a small shipment enters the duty calculation.

What to hand a broker

A broker can price an entry inside a day when the facts are complete. Send this set and skip the follow-up round.

Ask for the estimate in writing, split by duty line and fee. If the classification is arguable, ask whether a binding ruling is worth requesting. Rulings are public and searchable, and a ruling number settles the question for your broker, your bank and your accountant at once.

The factory's part is smaller than buyers assume but it matters: base material and finish stated on every quotation, so the invoice supports the code instead of contradicting it. TEYING does this by default. The description is the piece you control. "Gold earrings" printed over a carton of plated brass studs is the mismatch that holds an entry at the port.

De minimis is closed, including for samples

The $800 duty-free threshold that once made sample parcels easy is gone. It was removed for Chinese-origin goods in May 2025, suspended worldwide on August 29, 2025, and codified at 19 CFR 10.151 in June 2026, with postal shipments following in July 2026. Congress has set the permanent repeal for July 1, 2027.

Three effects follow for a brand. A 60-piece sample run is now an entry like any other, so budget duty and fees on samples, not just on production. Do not split one order across parcels to duck a threshold, which is an exposure rather than a saving. And treat every shipment as an entry that needs a value, a description and a classification.

If the next order is China-origin and US-bound, send the SKU list and target quantity through the TEYING quote form. Base material, finish and origin are stated per SKU so your broker classifies from facts rather than from a product name.

FAQ

What duty rate should I budget on a China-made jewelry order?

For gold-plated brass under HTS 7117, plan on roughly 28% to 31% of goods value once MFN, Section 301 List 4A and the 12.5% forced-labor duty are stacked. For 925 silver under 7113.11.20, about 33.5%. Both exclude MPF, HMF and brokerage, and both hinge on the ten-digit line, so confirm with a licensed customs broker.

Can small sample parcels still come in duty-free?

No. Duty-free de minimis treatment was removed for Chinese-origin goods in May 2025, suspended worldwide on August 29, 2025, and codified by CBP in June 2026 at 19 CFR 10.151. Congress set the statutory repeal for July 1, 2027. Small shipments now enter the duty calculation, so put duty and fees into the sample budget.

Are sample shipments handled differently from bulk?

Only in scale. Duty follows entered value, not the purpose of the shipment, and the de minimis route is closed. A sample parcel is still an entry with a value, a description and a classification, and the courier passes the duty plus its advance fee to the recipient. Declare the sample accurately rather than marking it as a gift.

What should I give my broker to get a firm number?

Four facts get the work started: ten-digit classification, country of origin, entered value and the Incoterm. Add the mode of transport and whether the product is children's jewelry. Ask for a written estimate split by duty and fee, and request a binding CBP ruling if the classification is arguable.

Why do two suppliers quote different duty on the same ring?

Because the duty follows the line, the origin, the entered value and the Incoterm, and any one of those can differ between two quotations. The same ring can also sit on different ten-digit lines depending on how the material is described. A broker classifying your actual SKU is the only route to a defensible figure.

US-bound order and need the tariff facts stated?

Send the SKU list and destination; material, finish and origin are stated per SKU so your broker classifies from facts.

Request a Factory Quote